Carpet Cleaning



Dry cleaning results from complete control of moisture. All cleaning systems require some amount of moisture. How that moisture is controlled determines whether the system is “wet extraction” or “dry extraction.” Wet methods can leave behind up to a quart of solution per gallon used; we use on average, less than 1 teaspoon per square foot. Tiny pre-moistened “sponges” are gently brushed through the carpet fibers delivering this moisture.




These sponges trap, dissolve and absorb the dirt, which is then vacuumed away with our extractor immediately leaving your carpet; clean, fresh, dry and ready to use. All without the stiff dirt attracting residue common with the wet methods. Immediately ready for use

No downtime! No waiting for the carpet to dry! No wet feet!






Improves Indoor Air Quality



Research studies have shown that one cleaning with the HOST System M & H Cleaning uses reduces:

        • Dust mites by 78%
        • Dust Mite Allergen by 89%*
        • Cat Allergen by 85%
        • Mold Spores by 97%

*For more informaion on the environment benefits safety and   most recent studies, please click on the following link;

Go Green When You Carpet Clean  -  pdf format


Did you know?

Products or equipment that advertise they remove dust mites and mold from the environment are under the jurisdiction of the EPA and must be made in an EPA registered facility.

HOST Machines are manufactured in EPA Establishment No. 074202-WI-001.